CC1310 Wireless Module
E70 Series User Manual
Copyright ©2012–2017, Chengdu Ebyte Electronic Technology Co., Ltd.
27
/
34
in some cases, it may need external pull-up resistor.
1
TXD、AUX open-collector outputs, RXD open-collector inputs
1
0
transmission power (approximation)
The external power must ensure that the ability of current
output is more than 1A and the power supply ripple is
within 100mV.
Low power transmission is not recommended due to its
low power supply efficiency.
0
0
14dBm (Default)
0
1
10dBm
1
0
7dBm
1
1
4dBm
1
0
transmission power (approximation)
The external power must ensure that the ability of current
output is more than 1A and the power supply ripple is
within 100mV.
Low power transmission is not recommended due to its
low power supply efficiency.
0
0
30dBm (Default)
0
1
27dBm
1
0
24dBm
1
1
21dBm
For example: The meaning of No.3 "SPED" byte
：
The binary bit of the byte
7
6
5
4
3
2
1
0
The specific value
(configured by user)
0
0
0
1
1
0
1
0
Meaning
UART parity bit 8N1
UART baud rate is 9600
Air data rate is 2.4k
Corresponding hexadecimal
1
A
8.Parameter Setting
When the module is in Mode 3 (M0=1 M1=1 M2=0) or Mode 5 (M0=1 M1=0 M2=1), the parameter can be set by instruction or software
in PC. Please visit www.cdebyte.com to download the software.
9.Secondary Development
E70
series have built-in CC1310 SoC chip. Users can conduct the development according to pin description below. Meanwhile, Ebyte
can develop the customized software for customers. Please contact us for more details.
