9
/USB3.0 driver USB3.0\IntelUSB_3.0_3.0.2.54
/RAID driver STOR_Win7_8_8.1_12.9.0.1001.exe
Intel Sideband Fabric driver Intel Sideband\Fabric Setup.exe
Troubleshooting
1.
Terminal does not boot
If the terminal cannot boot after pressing the power switch check that the
power cable is connected to the power socket. If the terminal power light still
remains off, the fan does not operate, and there is no BIOS beeping sound, it
might be the power supply problems.
a)
Check the power adapter is plugged in correctly to the power outlet.
b)
Check the connection between the terminal and the power adapter, and
then re-boot the system.
c)
If the terminal is working in high temperature environment that causes the
terminal automatically shut down in protection mode, please disconnect the
power of the machine. Wait until environment temperature has dropped
then restart.
d)
If the terminal does not boot after a sudden power failure or illegal
shutdown, unplug the adapter from the terminal, and press the power
button several times. Then plug in the adapter and boot again.
e)
If the adapter light blinks or go off, unplug the adapter immediately and do
not plugged in again. Contact with our products service center.
2.
The terminal automatically restart (or shutdown)
If terminal is frequently automatic shutdown or auto-boot during operation (or
boot up),
a)
Check the power supply is connected properly; make sure the plug is not
