PROCEDURE
Serial interface POS printer:
1. From the C prompt type “MODE COM 1 96,N,8,1” and press ENTER.
2. Type “TYPE CON>COM1” and press ENTER.
3. Type any alphanumeric character(s) and press ENTER. The cash drawer will open.
4. To return to the C prompt press and hold the CTRL key while depressing the letter C.
Parallel interface POS printer:
1. From the C prompt type “TYPE CON>LPT1” and press ENTER.
2. Type any alphanumeric character(s) and press ENTER. The cash drawer will open.
3. To return to the C prompt press and hold the CTRL key while depressing the letter C.
KEY LOCK OPERATION
The cash drawer has a three position key lock (Figure 2) and the fully counter clockwise lock position offers maximum
security. The cash drawer cannot be opened by printer signal or an individual when the lock is in the full counter clockwise
position. With the lock in the center position, the drawer will open when an electronic pulse is received from the POS printer.
The cash drawer is manually opened when the lock is in the clockwise position.
SPECIFICATIONS
MECHANICAL
Overall dimensions (mm)
460 (W) X 170 (D) X 100 (H)
Mass (Approx.)
4.3 Kg
ELECTRICAL (Input to Solenoid)
Pulse amplitude
12 - 24 VDC
Pulse width
100 – 200 msec
Pulse duty cycle
10% max.
Max. Input voltage
26.5 VDC
Current consumption
1A @ 12 VDC
Activation current
0.9 A max.
INTERFACE CABLE
Pin 1 (White)
Not connected
Pin 2 (Black)
Solenoid -
Pin 3 (Red)
Pin 4 (Green)
So
Pin 5 (Yellow)
Not Connected
Pin 6 (Blue)
Switch -
CONTROL COMMAND
ESC / POS
Ready
OLE POS (OPOS) OCX
Ready
SUPPORTING OS
DOS, UCDOS, LINUS, Windows 95, 98, NT,
2000, ME, XP, XPe, Vista, Win 7, WIN 8
Ready
Key lock
Figure 2
Permanent lock the cash drawer
Open the drawer by the key
Automatically open the cash drawer by printer signal
