25
26
"
"
"
WARNING
CAUTION
Make sure the switch is
in
the 'off'
position before you check the braking
system.
Change the tire
Disassemble and assemble the
tire
1.
Pull up the handbrake and make sure
the car cannot be moved before you
disassemble the wheel nuts
2.
Lift the car with a jack and
disassemble the tires and screws
3.
Use the steps above conversely
when assembling the tire
"
Braking Adjustment
The brake of this car can be adjusted
by yourself.
Please use your foot to press the
braking pedal, and make sure it is
functioning properly.
Transportation
Loading and offloading instruction.
1. When loading the car, for
transportation safety, please
make sure the power is off and
pull up the handbrake. You also
need to place blocks at the tires
and tie the car with belts to fix the
car.
2.
3.
If you load the car by forklift,
please put 2 pcs of wooden bar
that
are
no shorter than 1
meter
and no smaller than
100
x
100mm
to avoid scratching
your car. And
if you load the
car by the
platform, please
make sure the
driver is qualified.
To avoid the damage of the motor
and steering system during the
transportation, dragging the car
with front wheels or rear wheels
is forbidden!
Storage
Please follow the instructions below
if you will stock the car for a long
time
NOTE
"
Turn the main switch key to the
“OFF” position, remove the key,
and put it in a safe place.
"
CHASSIS PREPARATION
1.
Check if the air pressure of the
tires reach 30-35 psi (3 kgf/cm3)
2.
Clean the outside of the car with
antirust oil
3.
Cover the car and store it in a dry
and well-ventilated place
BATTERY PREPARATION
1.
Recharge the batteries and check
the fluid levels at least once
a month (if you use the lead-acid
batteries).
2.
Disconnect cables.
CAUTION
"
Cleaning products are forbidden to
put into battery cells
"
"
Consult your
Ecar
dealer before using the car if you have anything
problem with the brake because serious accident could occur in case of
brake failure.
MAINTENANCE
STORAGE
Wheel nut tightening
torque:
90NM-105NM