MAINTENANCE
2 . .link the cables as the picture
S14.B
S2.B
il WARNING
When installing the batteries:
1. Please carefully place the cables and make them
down, making sure the cables not crossover the vent caps
2. Always remove the negative(-)cable from the motor
controller first. Install it at last.
3. Do not tighten the battery nuts too much, because too much
force would damage the battery case.
28
MAINTENANCE
Brake system:
free adjustment
CAUTION
Before adjusting the brake , tread
the brake pedal several times to
adjust the brakes .
To adjust the brake distance
1. Remove the cover of the dash board
2. Check the brake pedal by pressing
with two fingers and with proper force and
measuring the forwarding distance of
the pedal until resistance is felt .
Brake pedal forwarding distance
85-95mm ( 3.35-3.74 inch)
3. If the brake system doesn't
work well , you should tread the
brake pedal more to exhaust the
air in the oil tube .
Do not loosen the brake cables
because of air leakage , which
will also affect the brake
adjustment and result in the
brake malfunctioning.
29
Summary of Contents for Sightseeing Bus
Page 5: ...34 34 Main power switch STOP STRUCTURE AND SPECIFICATION...
Page 8: ...Electrical accelerator 0 5k...
Page 9: ...Electrical accelerator 0 5k...
Page 21: ...36 37...
