966 Perry Highway, Mercer, PA 16137 • Phone (800) 687-5086
ECCBOutdoor.com
Let’s Get Started!
Step 1 - Attach the Arms to the Seat
• Open arm (C) to a 90° angle to create the bracing.
• Turn seat (B) on its side.
• Attach the arm (C) to the seat (B) with 2 bolts (D) into the pre-drilled holes on the outside, and a washer
(E) and nut (F). You will need the Allen wrench and open-ended wrench for this step.
• You will need to repeat this process on the other side.
Step 2 - Align the Back with the Arms/Seat
• Line up the bottom of the back (A) with the grooves on the back of the seat (B) and the pre-drilled holes of
the arms (C).
Make sure the arm’s cup holders are
on the on the outside when you attach
them to the seat.
Tip
D
F
E
B
C
C
C
C
B
The arms will not stand out straight
without the back frame’s support.
Tip
