966 Perry Highway, Mercer, PA 16137 • Phone (800) 687-5086
ECCBOutdoor.com
Step 3 - Attach the Back
• Attach the arms (C) to the back (A) using the 3.5” lag screws (H) in the pre-drilled holes, and tighten with
the Allen wrench.
• Then attach the back (A) to the seat (B) by placing the 2” lag screws into the pre-drilled holes on the back.
Care
Poly lumber is easy to clean and maintain. Dust with a soft cloth or soft bristle brush, and tend to spills and
stains with a mild soap and water. No waterproofing, no staining, and no painting is ever required!
IMPORTANT! Periodically check to make sure that all screws are properly tightened.
That’s all there is to it and now you have a comfortable chair that we hope you will enjoy.
Thank you for your business!
A
B
C
G
H
Because the seat does not have
pre-drilled holes, you will need to
apply more pressure when attaching
the 2” lag screws.
Tip
