ECCB OUTDOOR EO-OB-SET-3PC-DELUXE-INT-HARBOR-SQ Assembly Instructions Download

Page: 3 / 4

966 Perry Highway, Mercer, PA 16137 • Phone (800) 687-5086

ECCBOutdoor.com

Let’s Get Started!

Step 1 - Attach the Leg

• Flip over the top (A) so the bottom is facing up

• Line up the leg (B) with the pre-drilled holes of the top (A)

• Insert the bolt (D) and tighten on the inside of the leg with a washer (F) and nut (G)

using your open ended wrench

Step 2 - Attach the Middle Braces

• Align the middle brace’s (C) pre-drilled holes with the leg’s (B) pre-drilled holes

• Attach the middle brace (C) to the leg (B) using only the lag screws (E) and Allen wrench provided

• Repeat this step with the other middle brace (C)

The legs are interchangeable

so it doesn’t matter which one

you start with.

Tip

Summary of Contents for EO-OB-SET-3PC-DELUXE-INT-HARBOR-SQ

Page 1: ...our service department at support eccboutdoor com The side table must be completely assembled before attempting to use it Failure to do so could result in damage to the table or the user Use proper s...

Page 2: ...pieces C Top 1 piece A Hardware Shown at Actual Size G Nuts 4 pieces Important When attaching the nuts ALWAYS start with the metal part screwing onto the bolt screw Starting with the plastic part wil...

Page 3: ...ighten on the inside of the leg with a washer F and nut G using your open ended wrench Step 2 Attach the Middle Braces Align the middle brace s C pre drilled holes with the leg s B pre drilled holes A...

Page 4: ...ce C to the leg with the remaining lag screws E and Allen wrench Care Poly lumber is easy to clean and maintain Dust with a soft cloth or soft bristle brush and tend to spills and stains with a mild s...