ECCB OUTDOOR Outer Banks Value Series Assembly Instructions Download

Page: 3 / 4

966 Perry Highway, Mercer, PA 16137 • Phone (800) 687-5086

ECCBOutdoor.com

Let’s Get Started!

Step 1 - Attach the Brace to the Seat

• Attach the brace (D) to the seat (B) using a bolt (E) and washer (G) on the outside, and a washer and nut

(H) on the inside of each hole. You will need the open-ended wrench and the socket & ratchet for this step.

• You will need to repeat this process on each side.

Step 2 - Attach the Back to the Seat

• Lay the seat and the back on a flat surface

• Line up the movable joints on the back (A) with the holes in the rear of the seat (B)

• Attach the back (A) to the seat (B) with the hardware shown below

Lay the seat on its side

when attaching the brace

to the seat.

Tip

G H

Summary of Contents for Outer Banks Value Series

Page 1: ...please contact our service department at support eccboutdoor com The chair must be completely assembled before attempting to use it Failure to do so could result in damage to the chair or the user Use...

Page 2: ...B Arms 2 pcs 1 Right with cupholder 1 Left C Brace 1 pc D Washers 12 pcs G Nuts 6 pcs H Tools Provided Tools Not Included Allen Wrench Important When attaching the nuts ALWAYS start with the metal pa...

Page 3: ...hole You will need the open ended wrench and the socket ratchet for this step You will need to repeat this process on each side Step 2 Attach the Back to the Seat Lay the seat and the back on a flat...

Page 4: ...e brace Care Poly lumber is easy to clean and maintain Dust with a soft cloth or soft bristle brush and tend to spills and stains with a mild soap and water No waterproofing no staining and no paintin...