English
English
21
Connection speed
test
Start a speed test to check the connection bandwidth. When finished, the result
will appear on the screen.
Advanced Settings
Change the IP and DNS configuration on your TV.
Network standby
mode
You can enable or disable this feature by setting it to On or Off.
Note:
For more information on the options for this offer, see Connecting.
Installation menu
Automatic program
search (Retuning)
Displays the auto-tuning options.
Ground: Searches and stores DVB antenna stations.
Wired: Searches and stores DVB cable stations.
Analog: Searches for and stores analogue stations.
Satellite: Searches for and stores satellite stations.
Manual program
search
This option is used for direct program tuning.
Scanning network
channels
Searches for linked channels in the broadcast system.
Ground: He's looking for terrestrial channels.
Wired: He's looking for channels on the cable network.
Satellite: It's looking for satellite network channels.
Tuning analogue
reception
You can use this setting to tune the analog channels. This feature is not available if
you have no analog channels stored or if the channel you are currently watching is
not an analog channel.
Setting up satellite
reception
Displays the settings.
List of satellites: Displays the available satellites. You can Add, Delete satellites or
Edit satellite settings in the list.
Antenna installation: You can change the satellite dish settings and/or start a new
satellite scan.
Installation Settings
(Optional)
Displays the installation settings menu.
Standby Search mode (*): While in standby mode, the TV will search for new or
missing channels. All new broadcasts found will be displayed.
Dynamic channel update (*): If this option is set to Enabled, changes to the
broadcast, such as frequency, channel name, subtitle language, etc., will be applied
automatically during viewing.
* Availability depends on the model.
Home Transponder
Settings (*)
Use this menu to edit the main and backup parameters of the home transponder,
including the PID of the relevant M7 operator used to download the channel list.
Set your preferences and press the Green button to save your settings. Then start
the M7 operator installation using the
Auto Channel Scan
>
Satellite
menu.
* This option will only be available if the M7 operator is installed.
Delete service list
Use this function to delete stored channels. This setting is only visible if the Country
menu is set to Denmark, Sweden, Norway or Finland.
Select an active
network
This setting allows you to choose whether broadcasts within the selected network
should be listed in the channel list. This feature is only available for the country
selection Norway.
Signal information
You can use this menu item to monitor signal related information such as signal
level/quality, network name, etc. for available frequencies.
First time
installation
Clears all saved channels and settings and restores the TV to factory settings.
