English
English
17
To use the functions in the information bar, highlight the function symbol and press
OK
. To change the function
status, highlight the function symbol and press
OK
as many times as necessary. If the symbol is crossed out
with a red cross, it means that the function is not available.
FollowMe TV
With your mobile device, you can stream the latest broadcasts from your Smart TV using the FollowMe TV
feature. Install the appropriate Smart Center app on your mobile device. Start the application. For more
information on how to use this feature, see the instructions for the application you are using.
Note:
Depending on the model, your TV may not support this feature. This app may not be compatible with
all mobile devices. UHD (4K, Ultra HD) channels are not supported and both devices must be connected
to the same network.
CEC
This feature allows you to control CEC devices that are connected via HDMI port, using the TV remote control.
First, set the CEC option in
Settings
>
Device
to
Enabled
. Press the
Source
button and select the HDMI input
of the connected CEC device from the Source List menu. When a new CEC source device is connected, it will be
listed in the source menu under its own name, not under the name of the connected HDMI port (such as DVD
player, Recorder 1, etc.).
The remote control will automatically be able to perform basic functions when the connected HDMI source
is selected. To stop operation and control the TV again using the remote control, press and hold the "0 - Zero"
button on the remote control for 3 seconds. You can disable CEC by setting the appropriate option in
Settings
>
Devices
.
The TV supports the ARC (Audio Return Channel) function. This function is an audio link to replace other cables
between the TV and the audio system (A/V receiver or speaker system).
When ARC is active, the TV will automatically mute all audio outputs other than the headphone jack and the
volume buttons will be directed to the connected audio device. To activate ARC, set
Audio Output
in
Settings
>
Sound
as
HDMI ARC
.
Note:
ARC is supported via HDMI2 input.
Controlling the sound of a connected audio system
Allows for the Audio Amplifier/Receiver to be used with the TV. The volume can be controlled using the TV
remote control. To activate this feature, set Audio Output in
Settings
>
Sound
as
HDMI ARC
. When HDMI ARC
is selected, CEC is automatically set to Enabled if it is not already set. The TV speakers will be muted and the
sound of the source you are watching will be broadcast from the connected sound system.
Note:
The audio device must support System Audio Control.
E-Manual - E-handbook
You will find instructions for the functions of your TV in the electronic manual.
To use the electronic manual, go to the
Settings
menu, select
Manual
and press
OK
. For quick access to the
electronic manual, press the
Menu
button and then the
Information
button.
Use the directional buttons to select the desired category. Each category contains different topics. Select a
topic and press
OK
to read the instructions. To close the E-Manual screen, press the
Exit
or
Menu
button.
Note:
Depending on the model, your TV may not support this feature. The content of the E-Handbook may
vary depending on the model.
Contents of the Settings menu
Equipment offer
Virtual remote control
Enables or disables the virtual driver function.
