English
English
20
Audio menu
AVL (Au-
tomatic
Volume
Limiting)
Adjusts the sound to balance the output volume between programs.
If the Dolby Audio menu item is set to an option other than Off the AVL setting options will
be changed. Options such as Auto, Night, Normal and Off will be available. In Auto mode,
the TV automatically switches to Normal or Night mode according to the current time
information. If no time information is available, this function will always function as Normal.
When the TV switches to Night mode after setting this option to Auto for the first time, an
information bar appears on the screen.
Please note that compared to Normal mode, Night mode provides more aggressive dynamic
compression control that is suitable for quiet environments.
Advanced
Settings
Equalizer
Selects the equalizer mode. User settings can only be changed in User
mode.
Dynamic Bass
Enables or disables Dynamic Bass.
Sound Mode
You can select an audio mode (if the channel displayed supports it).
Digital audio
output
Sets the type of digital audio output.
Headphone
volume
Adjusts the volume of the headphones. This option will not be available
if the Audio Output option is not set to Lineout.
Before using the headphones, make sure the volume of the headphones
is set to a low level to avoid damaging your hearing.
Balance
Adjusts the sound balance. This function is activated when Audio
Output is set to TV or Headphones Only. The Balance item adjusts the
balance level of the TV and headphone speakers.
Reset
Restores some audio settings to factory defaults.
Offer Network
Connection method
Disable the network connection or set the connection type to Wireless device.
Find wireless
networks
Start searching for wireless networks. This option is only available if the Network
Type is set to Wireless Device.
Disconnect
To disconnect from the wireless network and delete the saved wireless network
profile (if previously saved), highlight this option and press
OK
. This option will not
be available if you are not connected to a wireless network. For more information,
see Connecting.
Press WPS on your
router
If your modem/router has the WPS function, you can connect to it directly using
this function. Highlight this option and press the
OK
button. To connect, press the
WPS button on your modem/router. This option is only available if the Network
Type is set to Wireless Device.
Connection speed
test
Start a speed test to check the connection bandwidth. When finished, the result
will appear on the screen.
Advanced Settings
Change the IP and DNS configuration on your TV.
Network standby
mode
You can enable or disable this feature by setting it to On or Off.
Note:
For more information on the options for this offer, see Connecting.
Installation menu
