English
English
37
Let's start
To use the internet-enabled features, your modem/router must be connected to the internet.
IMPORTANT: Make sure your TV and mobile device are connected to the same network.
Audio and Video Sharing
(if available) must be enabled for media sharing options. Press the
Menu
button
on the remote control, select
Settings
>
Devices
and press
OK
. Mark Audio and Video Sharing and change to
Activated
. Now your TV is ready to connect to mobile devices. Install the TV Smart Centre app on your mobile
device.
Launch the TV Smart Centre app on your mobile device. If all connections are configured correctly, the name
of your TV will be displayed on your mobile device. If the name of your TV doesn't appear in the list, wait a
moment and tap the Refresh widget. Select TV from the list.
Application
You can access the apps installed on your TV in the
My TV
menu. Press the
Menu
button on the remote control
to display the
My TV
menu. Highlight the selected application and press
OK
to continue.
To manage the apps installed on your TV, you can use the More apps option in the TV menu. You can add
an installed app to
My TV
, launch it or delete it. Highlight the application and press
OK
to see the available
options.
You can also add new apps available in the app store. To access, select Shop from the TV menu and press
OK
.
The available apps will be displayed. You can also access the App Market from the More Apps menu.
You can reset your customisations in
My TV
, including app-related customisations, to their default values using
the Reset apps option in the Settings menu (availability depends on your TV model and features). Highlight
this function and press the
OK
button. A confirmation dialog message appears. Highlight Yes and press
OK
to
continue. Please note that you will not be able to perform this operation again within the next few minutes.
Notes:
•
Possible problems with applications may be caused by application providers.
•
Third-party Internet services are subject to change, interruption or limitation at any time.
HBBTV system
HbbTV (Hybrid Broadcast Broadband TV) is a new industry standard that seamlessly combines TV services
delivered via broadcast with services delivered via broadband. It also allows access to consumer-only internet
services using connected TV and set-top boxes. Services provided through HbbTV include traditional broadcast
TV channels, catch-up services, video-on-demand, EPG, interactive advertising, personalisation, voting, games,
social networking and other multimedia applications.
HbbTV apps are available on channels where they are designated by the broadcaster. The broadcast will mark
one app as "auto launch" and it will launch on the platform automatically. Auto-launch apps are usually marked
with a small red button icon to alert the user that an HbbTV app is available on that channel. Press the red
button to open the app page. After the page is displayed, you can return to the original state of the red icon
by pressing the red button. You can switch between the red button icon mode by pressing the red button. It
should be noted that the ability to toggle the red button is provided by the application and some applications
may behave differently (other colored buttons, such as green, yellow, blue, may be defined for some other
functions, e.g. shortcuts).
If the user switches to another channel while the HbbTV app is active (in red button icon mode or full UI mode),
the following can happen.
•
The application can continue to run.
•
The application can be terminated.
•
The application can be terminated and another red button autostart application can be started.
HbbTV allows applications to run from both broadband and broadcast TV. The operator may offer both options
or only one of them. If a platform does not have a working broadband connection, it can still run applications
transmitted over the TV broadcast.
The red button app provides links to other apps. The user can then switch to other applications using the links
provided. The application must provide a way to exit itself; usually the Exit button is used for this.
