English
English
16
Analog:
If the Analog search option is enabled, the TV will search for Analog broadcasts after completing the
other initial settings. Once the initial settings are complete, the TV will begin searching for available broadcasts
of the selected broadcast types. During the search, the current results will be displayed at the bottom of the
screen. You can cancel the search by pressing the Menu, Back or Exit button. Channels that have already been
found are saved in the channel list.
Once all available stations have been saved, the Channels menu will appear. Here you can edit the channel list
according to your preferences using the Edit tab options, or press the
Menu
button to exit and view the TV
broadcast.
While the search is in progress, a message will appear asking if you want to sort channels by LCN*. Select Yes
and press
OK
to confirm.
*LCN (Logical Channel Number) is a feature that allows channels to be automatically arranged according
to their numbers in the order specified by the service provider
Notes:
•
To search for M7 channels after the First Installation, you must perform the First Installation again. Or press
the
Menu
button and enter
Settings
>
Setup
>
Automatic programme search
>
Satellite
. Then follow
the same steps outlined above in the satellite section.
•
Do not turn off the TV while the first installation is in progress. Note that some options may not be available
depending on your choice of country.
Media Playback via USB input
You can connect a 2.5" and 3.5" inch external hard drive (HDD with external power supply) or USB memory to
the TV's side USB input.
IMPORTANT!
Back up your files on the storage device before connecting it to your TV. The manufacturer is not
responsible for any damage or loss of data. Some types of USB devices (e.g. MP3 players) or USB hard drives/
memory cards may not be compatible with this TV. The TV supports FAT32 and NTFS disk format.
Wait a moment before each connection and disconnection, as the player may still be reading files. Failure to
follow this instruction may cause physical damage to the USB player and USB device. Do not remove the USB
memory while the file is playing.
USB hub can be used. Disks with external power supply are recommended. If you are connecting a USB hard
drive, plug it in directly.
Note:
When viewing image files, the Media Browser menu can only display 1000 images stored on the
connected USB device.
Media Browser
You can play music and movies and view photos stored on a USB drive by plugging it into your TV. Connect the
USB drive to one of the USB inputs located on the side of the TV.
When you connect a USB storage device to your TV, the Sources bar will appear with USBx highlighted. Press
OK
, the Media Viewer menu will appear on the screen Select the file of your choice, press
OK
to visualize or play
it. You can access the contents of a connected USB device at any time later from the Sources menu. You can also
press the
Source
button on the remote control and then select a USB storage device from the list of sources.
Use the
Settings
window to set Media Viewer preferences. The
Settings
menu can be accessed via the
information bar that appears at the bottom of the screen when playing a video or audio file or viewing an
image file. If the info bar disappears, press the
Info
button, highlight the gear symbol located on the right
side of the info bar and press
OK
. Depending on the type of media file and the model of TV and its features,
Picture Settings
,
Audio Settings
,
Media Browser Settings
and
Options
may be available. The content of
these menus may vary depending on the type of file you are currently opening. Only the
Audio Settings
menu
will be available while audio files are playing.