GB
DVD PLAYER WITH DVB-T
65
SAFETY INFORMATION
Read carefully and keep for future use!
ATTENTION: Applying controls, settings or performing procedures, other than those described herein,
can lead to dangerous radiation.
Read this manual carefully and keep for future reference. Pay special attention to the following information
about installation and use.
1. Read and follow the instructions – all instructions with reference to safety and operation shall be read
before using the product.
2. Keep these instructions – safety and operating instructions shall be kept for future reference.
3. Mind all warnings – all warnings on the device and in the manual shall be taken into consideration.
4. Proceed according to the instructions – follow all instructions for use and operation.
5. Do not expose the device to water that drips or is sprayed or to moistness – and no objects containing
liquids (e.g. vases) shall be placed on or near the device.
6. Clean only with dry towel – always unplug the device from the socket before cleaning. Do not use liquid or
aerosol cleaning agents. Clean only with dry cloth.
7. Do not cover ventilation openings. Install according to the manufacturer's recommendations – Openings
on the device cover serve as air vents and ensures proper operation and prevents overheating, these vents
must not be covered or otherwise closed. The holes should never be covered by placing the device on a
blanket, sofa, carpet or similar surface. This product should not be placed in built-in installations, such as
libraries or shelves, if there is not proper ventilation provided or the manufacturer's instructions are not
respected.
8. Do not install close to any heat sources, such as radiators, heat exchangers, heaters and other appliances
(including amplifi ers), which produce heat.
9. Do not interfere with the safety function of the plug with the protective power cord conductor. The plug
with the grounding prong has two working prongs and a third, protective prong. This prong is for your
safety. If you cannot insert the plug into your outlet, ask an electrician to change the obsolete outlet.
10. Do not step on the power cord and protect it from damage, especially close to the plug and at the power
jack of the device. Power cords should be lead in such manner to avoid stepping on them or being
squeezed by objects lying on them or pushed up against them. This especially applies to cords by plugs,
sockets, and in places, where they exit the device.
11. Use only accessories recommended by the manufacturer. Do not use accessories which are not
recommended by the device manufacturer. Risk of danger.
12. Use this product only with carts, stands, tripods, holders or tables recommended by the
manufacturer or sold together with this product. When using a cart make sure the cart does
not tip over with the product and no injuries or damage is sustained.
13. Unplug the device during a storm or if you do not plan to use for a longer period of time.
Unplug the device from the socket and disconnect the antenna and other cables. This way you avoid
damage being caused to the device by lightening or voltage surges in the electric main.
14. All servicing should be done by a qualifi ed service staff . The device requires servicing if damaged any way,
for example, the power cord or plug becomes damaged, liquid or a foreign object penetrated the device,
the device was exposed to rain or moistness, the device operation is not normal, or the device has fallen.
15. Power sources – this product shall only be operated with the type of power source specifi ed on the
product plate. If you are not sure about the type of power source inside your household, refer to the
product vendor or your local power company. Read through the operating manual for products designed
to be powered by battery or other sources.
16. Protected plug – the English version of the device is equipped with a power cord including a fuse. This
is a safety function: The process of replacing a fuse or restoring the protective function is described in
the manual. If it is necessary to replace the pug, make sure that you replace the fuse with the same type,
specifi ed by the manufacturer, carrying out the same safety function.
17. Grounding the external antenna – if an external antenna or cable system is connected to the product, make
sure the antenna or cable system is grounded, providing certain protection against voltage surges and
Summary of Contents for DVP 9909
Page 2: ......
