82
GB
TOOLS
Tools menu
1. Press
MENU
to enter the main menu.
2. Press
UP
or
DOWN
to highlight the item “Tools” and press
RIGHT
the
enter the tools menu.
3. Using
UP
or
DOWN
highlight the required item and press
OK
to enter
the submenu.
4. Press
EXIT
to exit menu.
Information
This menu displays some parameters and information about the receiver.
1. In the “Tools” menu select “Information” and press
OK
to open the
information window.
2. Press
EXIT
to exit the menu.
Factory Setting
This menu allows you to restore the default settings of the receiver. Restoring
the factory default settings will erase all saved channels.
1. In the “Tools” menu select “Factory Setting” and press
OK
. You will be
asked to enter password (the default password is 0000).
2. A window appears asking you to confi rm the action.
To restore the default settings and erase all channels, select “Yes”.
To cancel the reset to the default setting, select “No”.
3. Press
EXIT
to exit the menu.
Software update
Software update can be performed either from a fi le stored on a USB
memory device, or using the signal received through the air (OTA).
1. In the “Tools” menu select “S/W Upgrade by OTA” or “Upgrade By USB”
and press
OK
. The software update menu is displayed.
2. Using the arrows, select the required item and then highlight “Start” and
press
OK
to launch the update.
3. Press
EXIT
to exit the menu.
Remove USB device safely
1. In the “Tools” menu, select “Remove USB device safely”.
2. Confi rm by pressing
OK
. A confi rmation window appears.
3. Press
again
OK
.
Information
Factory settings
S/W Upgrade by OTA
Upgrade By USB
Remove USB device safely
Tools
xxx x.x.x
xxxxx xxxxx
xxxxx xxxxx
xxx x.x.x
xxx x.x.x
Information
Confi rm deleting all user data and settings.
All channels will be deleted.
Yes No
Factory settings
Upgrade Mode
All code
Upgrade File
No fi le
Start
USB update
Remove disk
Remove
Yes Cancel
Summary of Contents for DVT 980 HD DVB-T
Page 2: ......
