GB
52
– If the refrigerating appliance is left empty for a long time, turn it
off , defrost, clean, dry and leave the door open to prevent mold
formation inside the appliance.
RISK OF FIRE!
Warning: Risk of fi re/Flammable materials
This appliance contains R600a (the coolant isobutane), natural
gas which is very environmentally friendly but fl ammable. When
transporting and installing the equipment it is necessary to make sure
that no part of the cooling circuit is damaged. In the case of damage,
reduce the fl ame and ventilate the premises where the appliance is
located for a few minutes.
When replacing the refrigerator interior lighting, always unplug
the refrigerator. – otherwise there is a risk of electric shock. • If the
replacement of the interior lighting is too complicated for you, contact
your service representative. • If the products are equipped with LEDs,
do not remove the lighting cover and LED yourself. – contact your
service representatives.
REPLACING THE LED BULB
Do not remove the indicator cover or indicator yourself when the
internal or external LEDs no longer operate. Contact the service
representatives.
INSTALLATION AND OPERATION OF YOUR REFRIGERATOR
Before using the refrigerator, you must pay attention to the following points:
•
The operating voltage of your refrigerator is 220–240 V at 50 Hz.
•
The power cable of your refrigerator has a grounded plug. This plug must be grounded in a grounded
socket that has a fuse of at least 16 amps. If you do not have a socket that meets this requirement, have it
installed by a qualifi ed electrician.
•
We are not liable for any damage that may occur due to ungrounded usage.
•
Place the refrigerator where it will not be exposed to direct sunlight.
•
Your appliance must be at least 50 cm away from an oven, gas oven or burner and be at least 5 cm away
from an electric oven.
•
Your refrigerator must not be used outdoors or left in the rain.
Summary of Contents for ERB 21880 NXA++
Page 2: ......