English
English
8
Changing the door opening side
Tools needed to change the door opening side
Phillips screwdriver
Small flat screwdriver, scraper
Ratchet with extension size 5/16” (8
mm)
Adhesive tape
1. Turn off the refrigerator and remove everything from the door shelves.
2. Secure the door with adhesive tape.
3. Remove the left opening cover of the upper hinge, the upper hinge cover (on the right) and unscrew the
upper hinge bolts, then remove the upper hinge. Hold the door in vertical position all the time and make
sure it does not fall.
Upper hinge cover
Upper hinge
4. Remove the door, remove the lower hinge and the adjustable leg. Then install the lower hinge on the left
side of the freezer and the adjustable leg on the right side.
Adjustable leg
Bottom hinge
Bottom hinge (different version)
5. Install the door on the lower hinge and check that the seal is sealing properly and that the door position is
correct. Install the upper left hinge and attach hinge cover.
