GB
12
13
NOTES
Connect the USB cable to the machine and the power source. If using an adapter
(included), connect it to an easily accessible electrical outlet. The red LED on the body
of the trimmer lights up permanently when connected to the power source.
Warning:
A fully charged battery (after about 2 hours of charging) is indicated by a
green LED. The operating time with a fully charged battery is about 60 minutes.
USING THE APPLIANCE
NOTES:
The GRS 3820 Magnetic is designed for hair and beard grooming. The ZS 2620
Magnetic is designed for hair styling.
The beard/hair cut must be dry.
The T-shaped
head and comb attachments are designed for styling hair
The head with 3.5 mm
wide blades is designed for detailed shaping of eyebrows and beard, or for cutting
out shapes in the hairstyle.
For beard grooming (only on the GRS 3820 Magnetic
model), the U-shaped comb head + special comb is designed.
Switch on the device
by moving the switch to position I (the LED is white). Slide the switch to position 0 to
switch the unit off.
Setting the cut length
The cutting height (information in mm is printed directly on the attachment)
is determined by using the appropriate comb attachment. When replacing the
attachments, make sure that it is correctly attached to the head (you will hear a click).
For a minimum cutting height (0.5 mm), the trimmer can be used without the comb
attachment. To remove the comb attachment, gently push the attachment from the
back of the device with your thumb until it releases from the lock.
Replacing the head with blades
Squeeze the tabs on the sides of the trimmer body to release the head. Pull it out of
the device in the direction of the arrow on the head. When putting the head back on,
make sure that it fits well into the device (you will hear a click).
TRIMMING
The length of the cut may vary according to the cutting angle. First, start with the
comb attachment set to the longest cut, then use shorter cutting lengths during the
cutting process. Comb through the hair/beard before styling.
Hair Trimming
Position the person being cut so that their head is at eye level. Cover her shoulders
