42
EN
ZERO (reset) or TARE functions
These functions are used for measuring the weight of doses, gradually added to the previous amounts that
remain on the scale. Place the fi rst dose on the scale and its weight will be shown on the display. Before
adding another dose to the scale, press the
button to reset the value on the LCD display (“0”). This action
can be performed repeatedly.
ZERO (reset) function
If the total weight for all doses on the scale is lower than 200 g, the ZERO function
will be used automatically.
Every time the
button is pressed, the LCD display will show “-----”, or “0 g”.
“-----” indicates the processing of data. Wait a few seconds before continuing in
the weighing process. After resetting, the display will show “0 g”. The maximum
permitted weight will be reduced by the weight of all doses.
TARE function
If the total weight for all doses on the scale is higher than 200 g, the TARO
function will be used automatically.
Every time the
button is pressed, the LCD display will show “-----”, or “0 g”.
“-----” indicates the processing of data. Wait a few seconds before continuing
in the weighing process. The TARE function is active if the display shows “0 g”
and a “T” icon appears in the bottom left corner of the display. The maximum
permitted weight is reduced by the weight of all doses.
Automatic shut off
If the display shows the same value (or “0”) for 30 seconds, the scale will be shut
off automatically.
Press
Press
