ECG OP 201, Instruction Manual

14

GB

Functions of the power and speed selection button

First press of the button 

3

: starting work, lower speed (3000 rpm)

Second press of the button 

3

: switching to higher speed (4000 rpm)

Third press of the button 

3

: turning off the device

How to use the attachments in the right order

Make sure that the sanding band (

5

, 

6

 or 

7

) is properly inserted in the device. 

Step one 1 – FILING:

 Attach the coarse sanding band 

7

. Gently file and shape the edge of the nail to prevent 

ingrown nail. Nail filing helps to prevent damaging them.

Step 2 – SANDING:

 Attach the fine sanding band 

5

. Gently sand the surface of the nail until the unevenness 

is smoothed. To prevent any damage to the nail, we recommend to use this 1 × in 14 days. Do not apply 

continually in one spot for longer than 15 seconds.

Step 3 – BUFFING:

 Attach the extra fine sanding band 

6

. Buff the surface of the nail until you reach the 

required level of shine. Repeat the steps as necessary.

Why to use a nail file

The shape of the sanding band will ensure a professional result in the comfort of your home without a visit to 

the nail saloon. Save time and money. The perfect appearance of your nails will last several days.

You can use the sanding band 

7

 for filing of artificial nails – gel nails.

MAINTENANCE AND CLEANING

Wipe the body of the device using soft, dampened cloth. Do not use aggressive chemicals or solvents for 

cleaning. Clean the sanding bands using a dry brush (e.g. cosmetic brush). You cannot wash the sanding bands 

under running water.
Replace the cover of the sanding band attachment and store the device in a dry and clean place. Remove 

batteries from the device if you do not plan to use the device for a longer period of time.

Note:

 You can buy replacement sanding bands under the name ECG NK OP 201

TECHNICAL DATA

Power: 2 × 1,5 V AA batteries (not included)

WARRANTY:

 The following situations void the warranty:

Incorrect or inappropriate handling of the device, failure to observe safety measures applicable to the device, 

the use of force, alterations or repairs made by a party other than an authorized service centre.

Components subject to normal wear and tear are not covered under the warranty.

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic 

recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European 

countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste. 

Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative 

impacts on human health and the environment by properly recycling your product.

Recycling contributes to preserving natural resources. For more information on the recycling of this product, 

refer to your local authority, domestic waste processing organization or store, where you purchased the product.

This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.

The instruction manual is available at website www.ecg-electro.eu.

Changes in text and technical parameters reserved.

08/05