English
English
4
WEIGHT MEASUREMENT
1.
In order to achieve accurate results, the scale should be placed on a flat,
hard and stable surface and placing it on a carpet or other soft surfaces
should be avoided. Ensure before weighing that there is no foreign object
under the scale.
2.
Press briefly on the centre of the weighing area to turn on the scale. "0.0"
appears on the display.
3.
Step on to the scale carefully. Stand evenly on the scale, do not move and
wait until the weight indicator on the display stabilizes.
Warning:
The glass surface becomes slippery when wet. Keep dry!
Automatic shut off
The device automatically turns off when you step off the scale. The automatic
shutdown occurs in the event that the display shows “0.0” or when it shows the
same weight for about 8 seconds.
Switching between the measurement units
You can switch between the measurement units (kilograms/pounds/stones) following way:
1.
Locate the switch on the bottom of the scale.
2.
When the scale is switched off, press the button for switching between the units. The LCD display shows
which unit was just used. Change the unit by pressing the button again.
WARNINGS
1.
Discharged battery warning
: If the battery is dead, the display shows the symbol "LO“. In that case,
replace the battery.
2.
Overload
: If you load more than the allowable weight limit, the symbol "ERR“ appears on the display.
If the display shows an error or if the scale does not switch off for a long time, please, remove the battery for
about 3 seconds and then reinsert it. If this does not resolve the problem, please ask your vendor for advice on
how to fix your issue.
MAINTENANCE AND CLEANING
Use wet cloth to clean the scale and take care that water does not get inside the scale. DO NOT USE chemical
cleaning agents/agents with abrasive effect. Do not immerse the device into water!
