19
EN
SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE FOR FUTURE USE!
Warning:
The safety steps and instructions in this user's manual do not include all the pos-
sible conditions and situations which may arise. The user must understand that a factor that
cannot be built into any product is common sense, caution and care. These factors must
therefore come from the user/s using and operating this product. We do not take respon-
sibility for damages caused during transport, by incorrect use, by voltage fl uctuations or a
change or modifi cation of any part of the product.
1. Make sure that the voltage in your power socket corresponds to the voltage on the
product's label and that the power socket is properly earthed. The power socket must be
installed according to valid safety regulations.
2. Do not use the sandwich maker if the power cord is damaged. Do not remove protective
covers from the product as there exists a danger of injury by electric shock!
3. To avoid potential injury by electric shock, protect the product from direct contact with
water and other liquids.
4. The sandwich maker should not be left in operation unsupervised.
5. We recommend that you do not leave the sandwich maker with the power cord inserted
in the power socket without supervision.
Before carrying out maintenance pull the power cord out of the power socket. Do not
pull the power plug from the power socket by pulling on the cord. Pull the cord out of
the power socket by holding the power plug.
6. Do not use the sandwich maker outdoors or in a wet environment. Do not touch the
power cord of the sandwich maker with wet hands. There is a danger of injury by electric
shock.
7. Pay extra attention if using the sandwich maker near children.
8. The power cord must not touch any hot parts or go over sharp edges.
9. The surface temperature of the product may be higher than usual during operation.
Place the sandwich maker away from other objects to ensure free circulation of air neces-
sary for its proper function.
10. During operation and afterwards, do not touch the baking areas or hot parts of the prod-
uct's cover until the product cools down. Only touch the handle so as to prevent burns.
11. The baking surfaces of this product have a non-stick surface so they are easy to clean. So
do not use any metal or other hard objects or utensils for cleaning or handling the inside/
outside parts of the product, this is to prevent them from being damaged.
12. Do not fl ush the baking surfaces under water and do not place in water.
