GB
16
Note:
When using for the fi rst time there may some smoke may be emitted. This is normal, because this is the fi rst
heating of the inside parts of the product.
PREPARING SANDWICHES
1. Prepare the fi lling for the toasted sandwich. For each sandwich you will need two slices of bread and an
appropriate fi lling.
2. To achieve a better golden brown colour, you can grease the side of the bread in contact with the hot plate with
a little butter.
3. Place the slice of bread with the buttered side on the bottom baking plate, insert the fi lling and cover with the
second slice of bread with the buttered side facing upwards. You can toast only a single sandwich. If you want to
achieve the best results it is important to place the fi lling correctly between the bread slices.
4.
Carefully close the top baking surface over the sandwich so that the sandwich maker is completely closed.
5.
After 2-3 minutes open the sandwich maker and check if the sandwich is suffi
ciently toasted. Length of preparation
time, if you want a crispy, toasted sandwich, it depends on the type of bread, the used fi llings and your personal
taste.
6.
Do not use metal utensils to remove the toasted sandwich. Do not use sharp kitchen utensils that cause scratching.
7.
After fi nishing using the sandwich maker, disconnect it from the wall socket.
Note:
While baking the green ready light turns on and off signalling readiness for baking depending on how well the
temperature of the baking surfaces is maintained.
CLEANING
Before cleaning always pull the power cord out of the socket and wait until the sandwich maker has completely cooled
down.
To remove burnt crumbs use, for example a hard brush. Using a damp cloth clean the outside surfaces of the sandwich
maker. Do not use sharp objects or abrasive agents to clean the sandwich maker.
Do not submerge the sandwich maker in water and do not wash it in a dishwasher!
You can store the product in a vertical position to save space.
TECHNICAL INFORMATION
For the preparation of 4 triangular sandwiches
Easy to clean baking surfaces
Non-stick surface treatment of the baking surfaces
Heat insulated handle
Power indicator light / ready for baking light
Stainless steel case
Nominal voltage: 230 V~ 50 Hz
Nominal input power: 700 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand
over the product to the specifi ed location for recycling electric and electronic equipment. Prevent negative impacts on
human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to
your local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and electrical
safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
08/05
