7
Desktop charging:
1. Place the radio in the desktop charger and the radio will be
charged automatically.
2. After charging is completed, take out the radio.
USB cable charging:
3. Connect the charge/data cable to the USB Type-C interface of
the radio.
4. Connect the other end of charge/data cable to the charger, and
then connect the charger to AC power socket. Battery, radio and
charger will be moderately hot during charging, this is normal.
5. After charging, disconnect the charger from AC power source.
NOTE:
• Under the circumstance where data transmission is not supported,
the in-built data cable is for charging only.
• The lithium ion battery attached with the radio can be used after
ore
thorough use, so that the battery can reach its optimum usage
state.
• If the battery voltage is too low, the radio will automatically power
