EchoMap v3.0
23
important information with minimum heads down time.
The
Filters
menu allows you to change the cut off range distance,
and the
Layers
menu allows you to set up multiple pages of
navigational information to overlay on the moving map.
3.11.1
Change Filter Settings
Press the
Nav
button, select
Map
.
In the Map menu
select
Filter
. In the filter menu you can scroll to the
desired navaid with the
Up
and
Down
arrows and
change the settings with the
Left
and
Right
arrows. When your
selections are complete you can back out of each section of menus
by pressing the
Nav
button.
The
Range
setting in the menu allows you to set the distance
ahead of your aircraft that you want this type of navaid to be
displayed. The
Zoom
setting is the range, in miles, as shown in
the upper right hand corner of the moving map at which all of the
Navaids will disappear.
You can set the
Distance
filter for public and private airports.
Airports do not have a zoom setting, but automatically determine
if they should be displayed at a given zoom range based on the
size of the facility.
The
Minimum Runway
filter sets the minimum runway length
needed for an airport to display on the map or in airport lists.
Example - Setting
VOR Distance to
200 miles and
VOR Zoom
to 500
miles would mean that you can see VOR’s up 200 miles ahead of you,
but if you increased the range of the compass ring out to 500 miles all
the VOR’s would disappear
.
Summary of Contents for EchoMap 3.0
Page 27: ...EchoMap v3 0 27...
