ECHO Robotics RP-1200 Quick Start Manual Download

Page: 1 / 4

RP-1200 Quick Start Guide

P/N YB-071-00016-0A

REVISED 11/05/2019

ENGLISH

Read the RP-1200 Technical Manual before using the robot

Safety and Information

Symbols

The robot can be dangerous if misused.

Never place hands or feet under the robot when it is
powered ON.

Beware of projectiles.

Keep animals away from the robot.

Water cleaning with high pressure jet systems can cause
damage.

The robot is protected by an access code.

Read the technical manual before using the robot.

Press the STOP button and wait for the cutting disc to
stop rotating before handling the robot.

Always keep a safe distance from the robot when is it
powered ON and the cutting discs are rotating.

Do not ride on the robot.

Keep bystanders away from the robot.

Wear protective gloves when handling the robot.

The robot is equipped with an anti-theft system.

Summary of Contents for RP-1200

Page 1: ...Keep animals away from the robot Water cleaning with high pressure jet systems can cause damage The robot is protected by an access code Read the technical manual before using the robot Press the STOP...

Page 2: ...tended idle time or winter storage The Smartbox Lift the STOP button up to access the Smartbox Use the Smartbox to configure the robot Starting To start the robot press and hold for five seconds then...

Page 3: ...on after charge instructs the robot to remain in the charging station after it is fully charged Set Operating Parameters Press on the Smartbox to access the SETTINGS menu Use the SETTINGS menu to set...

Page 4: ...le application Service Inspection Inspect the robot at least once a week move the power switch to the OFF position check the condition of the blades verify that the cutting heads rotate freely remove...