background image

10

1.  Hold trimmer firmly and squeeze throttle trigger to accelerate 

engine.

2.  Tilt trimmer so cutting teeth are angled slightly toward the hedge 

or shrub and proceed to cut.

  WARNING

Never remove hands from unit when blades are moving.

  WARNING

The engine continues running even when the blades have stopped 

due to an obstruction. If this occurs, stop the engine, disconnect 

ignition cable and remove the obstruction.

m

aInTenanCe

 

WARNING

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 

openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete 

stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. 

Wear gloves to protect hands from sharp edges and hot surfaces.

o

peraTIon

 

 

hedge

 

TrImmIng

 

 

WARNING

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 

openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete 

stop before removing obstructions, clearing debris, or servicing unit. Wear gloves to protect hands from sharp edges 

and hot surfaces.

  

  WARNING

Hedge Clipper blades are very sharp.  Touching them may lead to 

severe personal injury.  Avoid touching blades whenever possible, 

and always wear gloves to protect hands. 

Summary of Contents for 99944200485

















Reviews: