6
EQUIPMENT
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.
• Inspect shield for damage and is securely in place. Replace if shield is damaged or missing.
• Check that the cutting tines are firmly attached and in safe operating condition.
• The cultivator gear housing is designed for ECHO recommended tines. Do not modify the gear housing for any other
purpose or replace tines with other type or size.
Parts
• Do not use cultivator attachment if any part is missing or damaged.
• Have repairs done only by an authorized ECHO Service dealer.
• Do not use any attachment, accessory or replacement part unless it is recommended in this Operator's Manual.
WARNING
DANGER
Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combi-
nation. Read and comply with all safety instructions listed in this manual and safety manual. ECHO, INC. will not be
responsible for the failure of cutting devices or accessories which have not been tested and approved by ECHO for
use with this unit.
D
ESCRIPTION
Locate this safety decal on your unit. Make sure the decals are legible and that you understand and follow the instruc-
tions. If the decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instructions
for specific information.
P/N 89016025560
1
2
3
4
5
4
6
7
