8
Before you start
Before you start
Packing list
Assembly
Attachment shaft assembly
1. Set power head/shaft assembly on a level surface.
2. Pull locator pin (A) out, and turn anticlockwise 1/4 turn to
lockout position.
3. Remove vinyl cap from attachment drive shaft.
The following parts are packed separately in the packing box.
When you have unpacked the box, please check the parts that it contains.
Contact your dealer if anything is missing or broken.
1. Shaft assembly and cutting attachment
2. Guide bar cover
3. Shoulder
harness
4. Socket
wrench
5. L-wrench
6. Storage
hook
assembly
7. Operator's
manual
WARNING
Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
Always switch off the unit and remove the battery when assembling the product.
Failure to do so could lead to an accident or serious injury.
