background image

1

IMPORTANT

The enclosed message provides information
necessary for the protection of the unit.

NOTE

This enclosed message provides tips for use,
care and maintenance of the unit.

Throughout this manual and on the product itself,
you will find safety alters and helpful, information
messages preceded by symbols or key words. The
following is an explanation of those symbols and
key words and what they mean to you.

THIS SYMBOL ACCOMPANIED
BY THE WORDS WARNING
AND DANGER CALLS
ATTENTION TO AN ACT OR
CONDITION THAT CAN LEAD
TO SERIOUS PERSONAL
INJURY TO OPERATOR AND
BYSTANDERS.

WARNING        DANGER

IMPROPER USE OR CARE OF THIS UNIT, OR
FAILURE TO WEAR PROPER PROTECTION
CAN RESULT IN SERIOUS INJURY. READ
AND UNDERSTAND THE RULES FOR SAFE
OPERATION AND ALL INSTRUCTIONS IN
THIS MANUAL.

INTRODUCTION

ECHO Engine Drill ED-200 is a lightweight, high
performance, two-stroke engined unit designed for
drilling.

This Manual provides the information necessary for
operation and maintenance.

SAFETY AND SPECIAL INFORMATION

CONTENTS

Introduction ..................................................................................................................................................

1

Safety and Special Information ....................................................................................................................

1

Safety ...........................................................................................................................................................

2

Operating Techniques ..................................................................................................................................

5

Description ...................................................................................................................................................

6

Assembling ...................................................................................................................................................

7

Operation .....................................................................................................................................................

7

Maintenance and Care .................................................................................................................................

9

Trouble shooting ........................................................................................................................................... 10

Maintenance ................................................................................................................................................. 11

Storage ......................................................................................................................................................... 13

Specifications ............................................................................................................................................... 14

Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of
publication, but are subject to change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.

The circle with the slash symbol
means whatever is shown within
the circle is prohibited.

Summary of Contents for ED-200

















Reviews: