13
Description
Description
1.
Spark plug
Provides spark to ignite fuel mixture.
2.
Air cleaner
Contains replaceable air filter element.
3.
Fuel tank
Contains fuel and fuel filter.
4.
Fuel tank cap
Covers and seals fuel tank.
5.
Starter handle
The grip of the starter, for starting the en-
gine.
("ES"START)
6.
Choke
Choke is located on top of the air cleaner. Move
choke lever to
position to close choke for cold start-
ing. Move choke lever to
position to open choke.
7.
Purge bulb
Pumping purge bulb before starting engine
draws fresh fuel from the fuel tank, purging air from the
carburettor. Pump purge bulb until fuel is visible and
flows freely in the clear fuel tank return line. Pump purge
bulb an additional 4 or 5 times.
8.
Spark arrestor - Catalytic silencer / Silencer
The silenc-
er or catalytic silencer controls exhaust noise and emis-
sion. The spark arrestor screen prevents hot, glowing
particles of carbon from leaving the silencer. Keep ex-
haust area clear of flammable debris.
9.
Stop switch
"SLIDE SWITCH" mounted on top of handle.
Push forward to start and run. Slide back to stop.
10.
Throttle position lever (Throttle setting device)
Pull
back to increase engine speed. Friction washers main-
tain throttle lever setting.
11.
Throttle trigger
Spring loaded to return to idle when re-
leased. During acceleration, press trigger gradually for
best operating technique.
12.
Housing cover
Covers blade area and activates safety
interlock switch when closed. Engine will not run if safe-
ty switch is not activated.
13.
Type and serial number
.
14.
Blower pipes
Exclusive positive locking system.
15.
Vacuum tube
Sucks in materials to be shredded.
16.
Vacuum elbow
Discharges shredded material.
17.
Debris bag
Collects shredded material.
Summary of Contents for ES-250ES
Page 2: ...2 Top cover composite volume...
Page 33: ...31 1Notes and rear cover MEMORANDUM...
Page 129: ...31 1Note e quarta di copertina MEMORANDUM...
Page 163: ...4 Packing list...
