background image

12

X7501180708

© 5/2015 ECHO Inc.

DESCRIPTION

ES-255

1.

STOP SWITCH 

- “SLIDE SWITCH” mounted on top of throttle handle. Push forward to start and run. 

Slide back to stop. 

2.

SPARK PLUG

 - Provides spark to ignite fuel mixture.

3.

FUEL TANK CAP

 - Covers and seals fuel tank.

4.

RECOIL STARTER HANDLE

 - Pull recoil handle slowly until recoil starter engages, then quickly and 

firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will 
occur.

5.

SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST

 -

T

he muffler 

controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of 
carbon from leaving the muffler. Keep exhaust area clear of flammable debris

.

6.

CHOKE

 - The choke control lever is located on the front of the air cleaner case. Move choke lever to 

COLD START 

(

to close the choke for Cold Starting. Move choke lever to RUN

 

(

position to 

open choke

.

7.

PURGE BULB

 - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging 

air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return 
line. Pump purge bulb an additional 4 or 5 times.

8.

BLOWER PIPES

 - Exclusive positive locking system.

9.

THROTTLE POSITION LEVER

 - Pull back to increase engine speed. Friction washers maintain throttle 

lever setting.

10.

THROTTLE TRIGGER

 - Spring loaded to return to idle when released. During acceleration, press trigger 

gradually for best operating technique.

11.

AIR CLEANER 

- Contains replaceable air filter element.

12.

LOCKING RING

 - Locks blower pipe.

13.

SHOULDER STRAP

 - Secures debris bag to shoulder.

14.

VACUUM TUBE

 - Sucks in materials to be shredded.

15.

DEBRIS BAG

 - Collects shredded material

16.

FAN/SHREDDER BLADE COVER 

- Covers blade area and activates safety interlock switch when 

closed.  Engine will not run if safety switch is not activated.      

Summary of Contents for ES-255 SHRED 'N' VAC









































Reviews: