background image

GT-230

SAFETY

X7702094204

5

© 04/2013 ECHO Inc.

International Symbols

Personal Condition and Safety Equipment

Users of this product risk injury to themselves and others if the unit is used improperly and/or safety 
precautions are not followed. Proper clothing and safety gear must be worn when operating unit. 

Physical Condition

Your judgment and physical dexterity may not be good:

• if you are tired or sick,

• if you are taking medication,

• if you have taken alcohol or drugs.

Operate unit only if you are physically and mentally well.

Eye Protection

Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit.

Hand Protection

Wear no-slip, heavy duty work gloves to improve your grip on the handles. Gloves also reduce the 
transmission of machine vibration to your hands.

Symbol

Description

Symbol

Description

Symbol

Description

Symbol

Description

Read and 

understand  

owners manual.

Fuel and oil 

mixture

Carburetor 

Adjustment - Low 

speed mixture

Carburetor 

Adjustment - High 

speed mixture

Wear eye, ear 

and head 

protection

Rotating 

Cutting Attachment

Safety/Alert

Carburetor 

Adjustment - Idle 

speed

Emergency Stop

Hot Surface

Avoid all power 

lines. This unit is 

not insulated 

against electrical 

current. 

Do not exceed

10,000 RPM.

Wear hand and 

foot protection. 

Use two handed

DO NOT smoke 

near fuel

Plan retreat path 

from falling 

objects

Primer Bulb

Choke Control 

“Cold Start” 

Position (Choke 

Closed)

Ignition

ON / OFF

DO NOT allow 

flames or sparks 

near fuel

Wear slip 

resistant footwear

Choke Control

"Run" 

Position

(Choke Open)

Do not use 

blades. String line 

only.

Keep bystanders and helpers 

away 15 m (50 ft.).

Do not operate 

without guards 

and shields in 

place.

Summary of Contents for GT-230

































Reviews: