8
S
PECIFICATIONS
MODEL ----------------------------------------------------- PB-200 Hand Held
Length ------------------------------------------------------- 330 mm (13.0 in.) (w/o pipes)
Width -------------------------------------------------------- 215 mm (8.5 in.)
Height ------------------------------------------------------- 340 mm (13.4 in.)
Weight (dry) ------------------------------------------------ 3.8 kg (8.38 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Displacement ----------------------------------------------- 21.2 cc (1.39 cu. in.)
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.10 in.)
Carburetor -------------------------------------------------- Zama w/primer bulb
Ignition System -------------------------------------------- Flywheel Magneto, capacitor discharge ignition type
Spark Plug -------------------------------------------------- NGK BPM-8Y Gap 0.65 mm (0.026 in.)
Exhaust System -------------------------------------------- Spark Arrestor Muffler
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.5 lit. (16.9 US fl. oz.)
Recoil Starter System -------------------------------------- Automatic Recoil Starter Centrifugal Type
Wide Open Throttle Speed (RPM) ----------------------- 7,000 - 9,000
Idle Speed (RPM) ------------------------------------------ 2,400 - 3,200
Maximum Air Volume -------------------------------------- 7.2 m
3
/min. (254 cu. ft./min.)
Maximum Air Speed w/pipes (MPH) -------------------- 61.0 m/sec (136 mph)
Sound Level at 50 ft. dB(A) scale per ANSI B175.2 ---- 6
5
dB(A)
A
SSEMBLY
WARNING
DANGER
Never perform maintenance or assembly procedures with engine
running or serious personal injury may result.
BLOWER
APPLICATION
Install Blower Pipes
1.
Align grooves in straight pipe with pegs on blower housing and
slide pipe onto housing.
2.
Turn straight pipe clockwise to lock into place.
3.
Align grooves in fan head nozzle with pegs on straight pipe and
slide fan head nozzle onto straight pipe.
4.
Turn fan head nozzle clockwise to lock into place.
