background image

SAFETY

PB-255LN

10

X7501186403

© 07/22  ECHO Incorporated

The components of this machine generate an electromagnetic 
field during operation, which can interfere with some 
pacemakers.  To reduce the risk of serious or fatal injury, 
persons with pacemakers should consult with their physician 
and the pacemaker manufacturer before operating this 
machine.  In the absence of such information, ECHO does not 
recommend the use of this machine by anyone who has a 
pacemaker.

Extended Operation and Extreme Conditions

Prolonged exposure to cold and/or vibration can result in injury. 
Read and follow all safety and operation instructions to 
minimize risk of injury. Failure to follow instructions can result 
in painful wrist/hand/arm injuries.

It is believed that a condition called Raynaud’s Phenomenon, which affects 

the fingers of certain individuals, may be brought about by exposure to 

vibration and cold. Exposure to vibration and cold may cause tingling and 

burning sensations, followed by loss of color and numbness in the fingers. 

The following precautions are strongly recommended, because the 

minimum exposure, which might trigger the ailment, is unknown.

• Keep your body warm, especially the head, neck, feet, ankles, hands, and 

wrists.

• Maintain good blood circulation by performing vigorous arm exercises 

during frequent work breaks, and also by not smoking.

• Limit the hours of operation. Try to fill each day with jobs where operating 

the unit or other hand-held power equipment is not required.

• If you experience discomfort, redness, and swelling of the fingers 

followed by whitening and loss of feeling, consult your physician before 

further exposing yourself to cold and vibration.

Summary of Contents for PB-255LN









































Reviews: