Echo PB-755T Operator'S Manual Download

Page: 2 / 32

able

onTenTs

Introduction ................................................................2

- The Operator's Manual .......................................2

Safety .........................................................................3

Manual Safety Symbols and Important Information .3

- International Symbols .........................................3

- Personal Condition and Safety Equipment .........3

- Equipment ...........................................................6

Emission Control .......................................................6

Description .................................................................7

Contents .................................................................. 11

Assembly..................................................................12

- Install Blower Pipes / Stick Handle PB-755H ..12

- Install Blower Pipes PB-755T ..........................13

Operation ..................................................................14

- Fuel ...................................................................14

- Starting Cold Engine .........................................16

- Starting Warm Engine .......................................17

- Stopping Engine ................................................17

- Operating Blower ..............................................18

Maintenance .............................................................19

- Skill Levels .......................................................19

- Maintenance Intervals .......................................19

- Air Filter ...........................................................20

- Fuel Filter ..........................................................21

- Spark Plug .........................................................21

- Cooling System .................................................22

- Exhaust System .................................................23

- Carburetor Adjustment ......................................25

Troubleshooting .......................................................26

Storage .....................................................................27

Specifications

...........................................................28

Servicing Information ..............................................32

- Parts/

Serial Number

...........................................32

- Service ..............................................................32

- ECHO Consumer Product Support ...................32

- Warranty Card ...................................................32

- Additional or Replacement Manuals ................32

Specifications, descriptions and illustrative material in this

literature are as accurate as known at the time of publica-

tion, but are subject to change without notice. Illustrations

may include optional equipment and accessories, and may

not include all standard equipment.

nTroduCTIon

Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-

job-dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and

SAFETY messages.

The

operaTor

manual

Read and understand this manual before operation. Keep it in a safe

place for future reference. It contains specifications and information

for operation, starting, stopping, maintenance, storage and assembly

specific to this product.

Summary of Contents for PB-755T

































Search results

Summary of Contents for PB-755T

Reviews:

Related manuals for PB-755T

Brands by name

Popular brands

Echo PB-755T, Operator'S Manual

Search results

Summary of Contents for PB-755T

Reviews:

Related manuals for PB-755T

Brands by name

Popular brands