P
OWER
E
DGER
O
PERATOR
'
S
M
ANUAL
9
S
PECIFICATIONS
MODEL ----------------------------------------------------- PE-200
Length ------------------------------------------------------- 1750 mm (68.9 in.)
Width -------------------------------------------------------- 300 mm (11.8 in.)
Height ------------------------------------------------------- 290 mm (11.4 in.)
Weight (dry w/cutter head) ------------------------------- 5.38 kg (11.9 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)
Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust ------------------------------------------------------ Spark Arrestor Muffler
Carburetor -------------------------------------------------- Zama diaphragm model RB w/purge
Ignition System -------------------------------------------- CDI (capacitor discharge ignition)
Spark Plug -------------------------------------------------- NGK BPM-8Y 0.65mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.45 lit. (15.2 US fl. oz.)
Recoil Starter System -------------------------------------- Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Drive Shaft -------------------------------------------------- 6.35 mm (1/4 in.) flexible shaft
Rotation Direction ----------------------------------------- Clockwise viewed from right side
Edger Head ------------------------------------------------- Metal blade
Blade Length ----------------------------------------------- 203.2 mm (8.0 in.)
Blade Width ------------------------------------------------ 50.8 mm (2 in.)
Blade Thickness ------------------------------------------- 2.3 mm (0.090 in.)
Handle ------------------------------------------------------- D-loop, Right - Grip
Vibration Reduction --------------------------------------- Rubber Cushion
Idle Speed (RPM) ------------------------------------------ 2,500 - 3,300
Wide Open Throttle Speed (RPM) ---------------------- 10,000 - 11,500
