10
S
PECIFICATIONS
MODEL ----------------------------------------------------- PPT-260
Length (Standard) ----------------------------------------- 2.76 m (9 ft. 1 in.)
Length (Extended) ----------------------------------------- 3.90 m (12 ft. 10 in.)
Length w/extension ---------------------------------------- 5.44 m (17 ft. 10 in.)
Width -------------------------------------------------------- .23 m (9.06 in.)
Height ------------------------------------------------------- .22 m (8.7 in.)
Weight (dry) ------------------------------------------------ 8.1 kg (17.9 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 34.0 mm (1.34 in.)
Stroke -------------------------------------------------------- 28.0 mm (1.10 in.)
Displacement ----------------------------------------------- 25.4 cc (1.55 cu. in.)
Exhaust System -------------------------------------------- Spark Arrestor Muffler
Carburetor -------------------------------------------------- Walbro WYJ Type W/Purge
Ignition System -------------------------------------------- CDI (capacitor discharge ignition)
Spark Plug -------------------------------------------------- NGK BPMR-8Y Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.55 lit. (18.6 US fl. oz.)
Starter System ---------------------------------------------- Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Sprocket Type ---------------------------------------------- 6 tooth spur, 9.53 mm (3/8 in.) pitch
Power Transmission Shaft Assembly ------------------- Aluminum Extrusion
Gear Case Ratio -------------------------------------------- 1.5:1
Oiling System ----------------------------------------------- Automatic
Saw Chain Oil Capacity ----------------------------------- 225 ml (7.6 oz.)
Handle ------------------------------------------------------- Right hand grip w/throttle trigger and lockout
Shoulder Harness ------------------------------------------ Standard
Idle Speed (RPM) ------------------------------------------ 2,400 - 3,200
Wide Open Throttle Speed (RPM) ----------------------- 10,000 - 12,000
Guide Bar and Saw Chain (91 VS) ----------------------- 305 mm (12 in.); 9.53 mm (3/8 in.) pitch
IMPORTANT This spark ignition system complies with Canadian ICES-002
