P
OWER
P
RUNER
TM
O
PERATOR
'
S
M
ANUAL
21
1.
Remove spark plug lead.
2.
Remove two (2) muffler cover screws and muffler cover (A).
3.
Remove screw and arm rest (B).
4.
Remove engine cover (C).
IMPORTANT
DO NOT use a metal scraper to remove dirt from the cylinder fins.
5.
Use brush to remove dirt from the cylinder fins.
6.
Remove grass and leaves from the grid between the recoil starter
and fuel tank.
7.
Assemble components in reverse order.
EXHAUST
SYSTEM
Spark Arrestor Screen
Level 2.
Tools Required: Cross Head Screwdriver, Soft Metal Brush,
4 mm Hex Wrench
Parts Required: Spark Arrestor Screen, Gasket
A
B
C
Summary of Contents for PPT-260 - 10-05
Page 29: ...POWER PRUNERTM OPERATOR S MANUAL 29 NOTES...
Page 30: ...30 NOTES...
