background image

P

ro

 A

ttAchment

 S

erieS

tm

27

o

PerAtor

'

S

 m

AnuAl

 

ECHO LIMITED WARRANTY STATEMENT FOR 

PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010

ECHO'S RESPONSIBILITY

ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship.  

Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, any defective product 

free of charge at any authorized ECHO servicing dealer within listed below application time periods, limitations and exclusions.

 THIS LIMITED 

WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS SOLD BY AUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL 

PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS.

 Repair 

parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period. Any 

damage caused by improper installation or improper maintenance is not covered by this warranty. All parts or products replaced under warranty 

become the property of ECHO, Inc. This warranty is separate from the Emission control warranty statement supplied with your new product. 

Please consult the Emission Control Warranty Statement for details regarding emission related parts. For a list of Authorized ECHO Dealers 

refer to WWW.ECHO-USA.COM or call 

1-800-432-ECHO. 

OWNER’S RESPONSIBILITY

To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at WWW.ECHO-USA.COM

 or by fill

-

ing out the warranty registration card supplied with your unit. Registering your product confirms your warranty coverage and provides a direct 

link if we find it necessary to contact you.

The owner shall demonstrate reasonable care and use, and follow preventative maintenance, storage, fuel and oil usage as prescribed in the 

operator’s manual. Should a product difficulty occur, you must, at your expense, deliver or ship your ECHO unit to an authorized ECHO servicing 

dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return of your unit after the repairs have been 

made.  For your nearest authorized ECHO servicing dealer, call ECHO’s Dealer Referral Center, at 1-800-432-ECHO or you can locate an ECHO 

servicing dealer at WWW.ECHO-USA.COM. Should you require assistance or have questions concerning ECHO’s Warranty Statement, you 

can contact our Consumer Product Support Department at 1-800-673-1558 or contact us through the web at WWW.ECHO-USA.COM. 

PRODUCT WARRANTY PERIOD

RESIDENTIAL APPLICATION  

• 

 

5 YEAR WARRANTY - 

All units for residential, or non-income producing use will be covered by this limited warranty for 

five

 

(5) years

 from 

date of purchase. 

EXCEPTIONS: 

 

For two-stroke engine powered products, the electronic ignition module, flexible drive cables, SRM solid drive shafts, and TC tines 

are warranted for the 

life*

 of the product on parts only.

 

Cutting attachments such as, but not limited to, bars, chains, sprockets, blades, and nylon trimmer heads for residential or non-income 

producing use will be covered for failures due to defects in material or workmanship for a period of 

60 days

 from original product 

purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty.

• 

 

ECHO’s Rapid Loader String Head carries a lifetime warranty on the line locking system, parts only; no labor. Refer to your operator’s 

manual for string head installation and maintenance instructions.

• 

 

All SB-Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are 

designed to fit.

COMMERCIAL APPLICATION 

• 

 

1 YEAR WARRANTY - 

All Chain Saws, QuikVent Saws, and Cut-Off Saws for commercial, institutional, agricultural, industrial, or income 

producing use will be covered by this limited warranty for one 

(1) year

 from the date of purchase.

• 

 

2 YEAR WARRANTY - 

All other

 

units for commercial, institutional, agricultural, industrial, or income producing use will be covered by this 

limited warranty for two 

(2) years

 from the date of purchase. 

EXCEPTIONS: 

 

For two-stroke engine powered products, the electronic ignition module, flexible drive cables, SRM solid drive shafts and TC tines, 

are warranted for the 

life*

 of the product on parts only. 

 

Cutting attachments such as, but not limited to, bars, chains, sprockets, blades, and nylon trimmer heads for commercial, institutional, 

agricultural, industrial, rental, or income producing will be covered for failures due to defects in material or workmanship for a period 

of 

30 days

 from original product purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by 

this warranty.

• 

 

ECHO’s Rapid Loader String Head carries a lifetime warranty on the line locking system, parts only; no labor. Refer to your operator’s 

manual for string head installation and maintenance instructions.

• 

 

All SB-Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are 

designed to fit.

RENTAL APPLICATION - 90 DAYS WARRANTY

•  Units for rental use will be covered against defects in material and workmanship for a period of 90 days from the date of purchase. 

*

  

ECHO’s liability under the “Lifetime” coverage is limited to furnishing parts specified under the PRO

d

UCT

 w

ARRANT

PERIO

d section of 

this warranty statement for 

“Life”

 free of charge for a period of ten (10) years after the date of the complete unit’s final production. 

w

arranty

 s

tatements

Summary of Contents for Pro Attachment Series PAS-265

































Reviews: