2
3 INCH CHIPPER/SHREDDER
SAFETY
1. Always stand clear of discharge area when operating
this machine. Keep face and body away from feed
and discharge openings.
2. Keep hands and feet out of feed and discharge
openings while machine is operating to avoid serious
SHUVRQDO LQMXU\ 6WRS DQG DOORZ
machine to come to a complete
stop before clearing obstructions.
3. Set up your work site so you are
QRW HQGDQJHULQJ WUDႈF DQG WKH
public. Take great care to provide
adequate warnings.
4. Do not climb on machine when operating. Keep
proper balance and footing at all times.
5. Check cutting chamber to verify it is empty before
starting the machine.
6. The rotor will continue to rotate after being disengaged.
6KXWRႇWKHPDFKLQHDQGPDNHVXUHDOOPRYLQJSDUWV
have come to a complete stop before inspecting or
servicing any part of the machine. Disconnect the
battery and remove the ignition key if applicable.
7. Do not insert branches with a diameter larger than
the max chipper capacity into machine or machine
damage may occur.
8. When feeding material into machine, do not allow
metal, rocks, bottles, cans or any other foreign
material to be fed into the machine.
13. Do not operate machine without shields in place.
)DLOXUHWRGRVRPD\FDXVHVHULRXVLQMXU\RUGHDWK
14.
.HHS DOO JXDUGV GHÀHFWRUV DQG VKLHOGV LQ JRRG
working condition.
15. Before inspecting or servicing any part of this machine,
VKXWRႇWKHPDFKLQHDQGPDNHVXUHDOOPRYLQJSDUWV
have come to a complete stop. Disconnect the battery
and remove the ignition key where applicable.
16. Check that all screws, nuts, bolts, and other fasteners
are secured, tightened and in proper working condition
before starting the machine.
17. Do not transport or move machine while it is operating
or running.
1.3 BEFORE OPERATING
1. Read and understand this owner’s manual. Be
completely familiar with the controls and the proper
use of this equipment.
2. Familiarize yourself with all of the safety and
operating decals on this equipment and on any of its
attachments or accessories.
3. Keep safety decals clean and legible. Replace
missing or illegible safety decals.
4. Obtain and wear safety glasses
and use hearing protection at all
times when operating this machine.
5.
$YRLGZHDULQJORRVH¿WWHGFORWKLQJ
Never operate this machine while
wearing clothing with drawstrings that could wrap
around or get caught in the machine.
6. Do not operate this machine if you are under the
LQÀXHQFHRIDOFRKROPHGLFDWLRQVRUVXEVWDQFHVWKDW
FDQDႇHFW\RXUYLVLRQEDODQFHRUMXGJHPHQW'RQRW
operate if tired or ill. You must be in good health to
operate this machine safely.
7. Do not operate this equipment in the vicinity of
bystanders. Keep the area of operation clear of
all persons, particularly small
children. It is recommended that
bystanders keep at least 50 feet
(15 meters) away from the area of
operation.
8. Do not allow children to operate
this equipment.
9.
8VHRQO\LQGD\OLJKWRUJRRGDUWL¿FLDOOLJKW
10. Do not run this equipment in an enclosed area. Engine
exhaust contains carbon monoxide gas, a deadly
poison that is odorless, colorless and tasteless.
Do not operate this equipment in or near buildings,
windows or air conditioners.
11. Always use an approved fuel container. Do not
remove gas cap or add fuel when engine is running.
Add fuel to a cool engine only.
12.
'RQRW¿OOIXHOWDQNLQGRRUV.HHSRSHQÀDPHVVSDUNV
smoking materials and other sources of combustion
away from fuel.
1.4 OPERATION SAFETY
Summary of Contents for SC-2013
Page 2: ......
Page 33: ...28 3 INCH CHIPPER SHREDDER ...