background image

G

RASS

 T

RIMMER

/B

RUSH

 C

UTTER

O

PERATOR

'

S

 M

ANUAL

3

IMPORTANT
The enclosed message provides
information necessary for the protec-
tion of the unit.

NOTE

This symbol accompanied by the words WARNING and
DANGER calls attention to an act or condition that can lead to
serious personal injury to operator and bystanders.

WARNING    

    DANGER

This unit can be dangerous and cause
serious injury if improperly used. to
reduce injury risk to operator, helpers
and bystanders, read and understand
the Operator's and Safety Manuals,
which are provided in Spanish.

ADVERTENCIA       

       PELIGRO

Esta unidad puede ser peligrosa y producir lesiones
personales graves si no se usa en forma adecuada.
Para reducir el riesgo de lesionarse, los operadores,
los ayudantes y los espectadores deben leer y
comprender el Manual Del Operador y los Manuales
De Seguridad que se entregan escritos en español.

89022809560

English Translation
Shaft Decal

Shaft Decal
Spanish Decal

Hot Surface Decal

P/N 89016006361

P/N 89022809560

M

ANUAL

 S

AFETY

 S

YMBOLS

 

AND

 I

MPORTANT

 I

NFORMATION

Throughout this manual and on the product itself, you will find safety
alerts and helpful, informational messages preceded by symbols or key
words.  The following is an explanation of those symbols and key
words and what they mean to you.

The circle with the slash symbol means whatever is shown
within the circle is prohibited.

This enclosed message provides tips for use, care and mainte-
nance of the unit.

S

AFETY

DECALS

Locate these safety decals on your unit.  Make sure the decals are
legible and that you understand and follow the instructions on them.  If
a decal cannot be read, a new one can be ordered from your ECHO
dealer.  See PARTS ORDERING instructions for specific information.

Summary of Contents for SRM-210 - 11-03 SERIAL NUMBER...

































Reviews: