background image

4

X7502310908

© 03/2014 ECHO Inc.

SRM-280U

SAFETY

Additional or Replacement Manuals

Replacement Operator, Safety Manuals, and Parts Catalogs

 

are available from your ECHO dealer or at www.echo-usa.com 
or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, 
IL 60047 (800-673-1558). Always check the ECHO Web Site for 
updated information.

Safety Videos

 are available from your Echo dealer. A $5.00 shipping charge will be required for each video.

SAFETY

Manual Safety Symbols and Important Information

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational 
messages preceded by symbols or key words. The following is an explanation of those symbols and key 
words and what they mean to you.

The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition 
which WILL lead to serious personal injury or death if not avoided.

The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition 
which CAN lead to serious personal injury or death if not avoided.

The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition 
which may lead to minor or moderate personal injury if not avoided.

The enclosed message provides information necessary for the protection of the unit.

Note:  This enclosed message provides tips for use, care and maintenance of the unit.

CIRCLE AND SLASH SYMBOL
This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result 
in serious or fatal injury.

For more information
scan this QR code.

Summary of Contents for SRM - 280U









































Reviews: