background image

5

For safe use of your product

Warning notices

Other indicators

Environment of use and operation

Do not use the product:

under poor weather conditions.

on steep slopes or in places which give no secure foothold and are thus slippery.

at night or in dark places with poor visibility.

When using the product on a gentle slope, work in a level, contour-like motion.

A serious injury could result if you fall or slip, or fail to operate the product correctly.

For your own health and your safe and comfortable work, operate the machine within the air temperature range of 

5

o

C to 40

o

C.

Failure to observe these instructions could result in damage to your health.

Being prepared in case of an injury

In the unlikely event of an accident or injury, please ensure that you are 
prepared.

First aid kit

Towels and wipes (to stop any bleeding)

Whistle or mobile phone (for calling outside help)

If you are unable to perform first aid or call for outside help, the injury could 
worsen.

Put safety first in the case of fire or smoke

If fire comes from the engine or smoke appears from any area other than the exhaust vent, first distance 
yourself from the product to ensure your physical safety.

Use a shovel to throw sand or other such material on the fire to prevent it from spreading, or put it out 
with a fire extinguisher.

A panicked reaction could result in the fire and other damage becoming more extensive.

 WARNING

 DANGER

 WARNING

 CAUTION

This symbol accompanied by the 
word 

"DANGER"

 calls attentions to 

an act or a condition which will lead to 
serious personal injury or death of op-
erators and bystanders.

This symbol accompanied by the 
word 

"WARNING"

 calls attentions to 

an act or a condition which can lead to 
serious personal injury or death of op-
erators and bystanders.

"CAUTION"

 indicates a potentially 

hazardous situation which, if not 
avoided, may result in minor or mod-
erate injury.

Circle and slash sym-
bol means whatever is 
shown is prohibited.

NOTE

IMPORTANT

This enclosed message provides tips 
for use, care and maintenance of the 
product.

Framed text featuring the word 

"IM-

PORTANT"

 contains important infor-

mation about the use, checking, 
maintenance and storage of the prod-
uct described in this manual.

Summary of Contents for SRM-4510





























Reviews: