CONTENTS
Tools needed: Rubber mallet
Description
Qty. Part Number
A. Bottom/back Panel
1
N/A
B. Front Panel
1
N/A
C. Top Panel
1
N/A
D. End Panel
1
N/A
E. Scabbard Panel
1
N/A
F. Hinge Pins
4 99944400452
G. Latches
2
99944400453
H. Scabbard - 20 in. case
1
N/A
I. Scabbard - 24 in. case
1
N/A
J. Scabbard - 32 in. case
1
(optional)
1 99988801212
K. Handle
1
99944400454
L. Scabbard Plug – Location (L) 1
N/A
Scabbard plug is stored in location (L) when the saw is in the
carrying case.
1.
Place panel (D) on flat surface. Align pegs of panel (A) with
holes on panel (D) and press into place until pegs snap into
holes.
2.
Align holes of panel (E) with pegs on panel (A) and press into
place until pegs snap into holes.
USAGE:
To insert saw into box:
1. Install scabbard (H/I/J) onto saw.
2. Insert saw with scabbard into box.
3. Place the scabbard plug into panel (E) when the saw is not in
the Carrying Case.
99988801210 (20”) / 99988801211 (24”)
ToughChest
™
Carrying Case Instructions
99922201673
12/16
SUP22201673
wArNING
Failure to follow these instrucitons could result in in
-
jury to the operator, property damage and/or damage
to the product and its contents.
1
A
B
C
D
E
H/I/J
L
