16
1.
Use only during appropriate hours.
2.
Make sure bevel at end of pipe faces outward.
3.
Allow the engine to warm up at a fast idle for a few minutes.
4.
Set engine speed with throttle position knob (F).
NOTE
The PB-2100 can be run at any speed between 2500 RPM to 7400
RPM once the engine has broken in (approximately after 3 fuel
tanks).
NOTE
Use lower speed to blow dry leaves from a lawn or flower bed.
Additional speed may be necessary to clean grass and leaves from
walks, patios and drives or to move gravel, dirt, snow, bottles or
cans from a driveway, street, parking lot or stadium.
NOTE
Never use a higher speed setting than necessary to perform a task.
Remember, the higher the engine speed, the louder the blower
noise. Minimize dust by using blower at lower speeds. Keep debris
on your property.
Be Smart - be a good neighbor.
M
AINTENANCE
Your ECHO blower is designed to provide many hours of trouble free service. Regular scheduled maintenance will help
your blower achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the
ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see your ECHO Dealer for repairs.
SKILL
LEVEL
Level 1 =
Easy to do. Most required tools come with unit.
Level 2 =
Moderate difficulty. Some specialized tools may be required.
Level 3 =
Experience required. Specialized tools are required.
ECHO offers REPOWER Maintenance Kits and Parts to make your maintenance job easier. Just below each task heading
are listed the various part numbers required for that task. See your ECHO dealer for these parts.
Summary of Contents for Type 1E PB-2100
Page 4: ......
