Wireless TimeClock Configuration Guide
14
7. Select disable or enable
Sweep
to reapply Event settings, removing any
manual settings.
- Enable or Disable.
- If enabled, specify the
Sweep Duration
0h00m, maximum 24h59m.
to set the interval.
Define Settings for OFF
1. Press [Enter] to select
OFF
as the Event
Action
.
2. Select a
Group Number
from 1 to 24,
and press [Enter] to select.
3. Select a type of day for
Recurrence
.
- Every day, Weekdays, Weekends, or
day of the week
4. Select a reference time of day for
When
.
- Time of Day, or an astronomical setting (Before/After Sunrise/Sunset)
5. Set a
Time
or an
Offset
, depending on the
When
option you selected.
• If Time of Day was selected, specify the
Time
in hours and minutes
00h:00m (am or pm).
• If an astronomical setting was selected, specify the
Offset
hours
and minutes from the astronomical setting. For example, if Before
Sunset is selected, choose how long before sunset you want the
Event to execute. The
Next Time
is calculated and displayed in
parentheses (##:## am).
6. Select disable or enable
Sweep
to reapply Event settings, removing any
manual settings.
- Enable or Disable.
- If enabled, specify the
Sweep Duration
0h00m, maximum 24h59m.
to set the interval.
TimeClock Settings
The TimeClock Settings menu provides access
to display preferences such as current Time
and Style (12 Hour or 24 Hour clock), Date,
Time Zone, Daylight Saving Time (DST)
location details, Sweep, Hold duration, and
Flick Warn. This menu also provides the option
to restore the factory or pre-commissioned
defaults.
Note:
For scheduled OFF Events, consider enabling Flick Warn.
See
Schedule Event
Event Number:
4
Action:
OFF
Group Number:
20
Recurrence Monday
When:
Time of Day
Time: 12:00am
Sweep: Disabled
TimeClock Settings
Time:
4:20
pm
Time Style:
12 Hour
Date: Aug/
2
/ 2021
Time Zone:
GMT -6
Latitude: 43
8 N
Longitude: 89
20
W
DST: US
Manual DST Dates
Sweep Interval: 10
min
Timed Hold:
120 min
Flick Warn:
Yes
Show Seconds:
No
Restore Defaults