Wireless TimeClock Configuration Guide
16
Set Daylight Saving Time
Set the current Daylight Saving Time (DST) location to use the default Daylight
Saving Time dates for the selected location.
1. Select
DST
from the TimeClock Settings menu, and press [Enter] to
modify.
2. Press [Up] or [Down] to scroll to the
Daylight Saving Time
options
(None, US, EU, and Manual), and press [Enter] to select.
Set Manual DST Dates
Set custom or manual Daylight Saving Time
dates as needed.
1. Select
Manual DST Dates
from the
TimeClock Settings menu, and press
[Enter] to select. The manual DST Dates
menu displays the current DST start and
end dates.
2. Press [Enter] to set new start and end dates.
3. Press [Up] or [Down] to scroll, and [Enter] to set the
DST Start Date
settings: Month, Day of Week, and Occurrence.
4. Press [Up] or [Down] to scroll, and [Enter] to set the
DST End Date
settings: Month, Day of Week, and Occurrence.
Set Sweep Interval
The Sweep feature ensures that an Event setting remains in effect—a
reinforcement in case a manual setting overrides the Event. The Sweep Interval
defines the frequency that the Event settings are reset, maximum 360
minutes. For example, if the Sweep Duration is two hours and the Sweep
Interval is 10 minutes, a total of 12 Sweeps would be executed after the
scheduled Event has occurred.
For the Sweep Interval to be in effect, the scheduled Event must have Sweep
enabled with a set duration. The Sweep feature is available for Action types
Scene
,
ON to Level
, and
OFF
. See
Define Settings for ON to Level
for an example.
1. Select
Sweep Interval
from the TimeClock Settings menu, and press
[Enter] to modify.
2. Press [Up] or [Down] to scroll to the target
Sweep Interval
frequency,
and press [Enter] to select.
DST Start Date
Month:
: March
Day of week:
Sunday
Occurence: Second
DST End Date
Month: November
Day of week:
Sunday
Occurence: First
