6
7
email - support@aampglobal.com
tel - 866-931-8021
email - support@aampglobal.com
tel - 866-931-8021
TESTING THE EFS-CA1200
STEP 3:
After installation move the asset outside and leave it running for five minutes
allowing time for the GPS receiver to receive a good signal from the GPS
satellites.
CONFIRMING THE LED LIGHTS
Upon initial power-up of the EFS-CA1200, the LEDs on the top of the device
will start flashing, Identifying the Mode status of the device.
Note: The vehicle must be outside with a non-obstructed view of the sky for
its first location to be set in the application.
Orange LED Status GSM/GPRS
Cellular Communications
Green LED Status GPS
Communications
Blinking: Tracker on, searching for
wireless signal
Solid - 2-way communication link with
the communication server estab
-
lished
Solid- GPS lock established
ADD THE ASSET TO YOUR WEBSITE APPLICATION
STEP 4:
1.
Login to emfleetmonitor.com
2. Click the settings
gear in the upper right
corner
3. Select Vehicles from
the left menu
4. Select Add Vehicle
from the upper right
corner